ZERO
Anchor-to-Go
Temporary sheet metal roof anchor
SKU: AAP000M
Overview
A Simple and effective primary anchor for access onto sheet metal roofs, the ZERO® Anchor-to-Go has interlocking cam clamps to secure the anchor to the edge of the roof sheeting (in the gutter line). This fast setup makes the Anchor-to-Go perfect for plumbers, painters, service technicians and installer that require short term roof access.
By attaching a rope line to the anchor with a snap hook or carabiner and placing it over the ridgeline, access can is made from the opposite side of the roof allowing secondary diversionary anchors to be installed.
Sizes
Rating
Life Span
Certifications
Product Detail
| Model | Size | Weight (g) | Dimensions | Material |
|---|---|---|---|---|
| AAP000M |
* |
3700g |
49 x 50cm |
Powder coated steel |
- Features
- Downloads
- Fall Clearance Calculator
Fall Clearance Calculator
Lanyard length (m)
Anchor position
Worker height allowance (m)
Clearance below worker (m)
This calculator provides a general estimate only. Calculations are based on a default energy absorber deployment allowance of 1.2m and a built-in 1m safety margin.
Fall arrest systems must be assessed by a competent person using the specific equipment instructions, site conditions, anchorage position, and rescue requirements. All system lengths, harness attachment position, available clearance, carried equipment, and worker height must be accurately measured and considered. Additional factors including swing fall hazards, system stretch, compatibility of components, and manufacturer instructions may affect the actual clearance required.
