ZERO
BlockMax1
Self-locking cable fall arrest device
SKU: FBR10C3
Overview
Designed to take on a multitude of vertical applications. The BlockMax1 is built with a heavy-duty thermoplastic housing and incorporates a 5mm steel cable that will self-lock in the event of a fall and an energy absorption system located near the snap-hook to rapidly reduces energy for added protection.
Setting up the BlockMax1 is simple with the swivelling anchorage point and self-locking snap hook.
Sizes
Rating
Life Span
Certifications
AS/NZS 1891.3:2020 – Accepted under AS/NZS 1891.3:2020 (Table 1) for Type 2 fall-arrest devices
Product Detail
| Model | Size | Weight (g) | Dimensions | Material |
|---|---|---|---|---|
| FBR10C3/060 |
6m |
3.92kg |
270x260x90mm |
Composite housing, galvanized steel / stainless |
| FBR10C3/100 |
10m |
4.2kg |
270x260x90mm |
Composite housing, galvanized steel / stainless |
| FBR10C3/150 |
15m |
4.9kg |
270x260x90mm |
Composite housing, galvanized steel / stainless |
- Features
- Downloads
- Fall Clearance Calculator
Fall Clearance Calculator
Lanyard length (m)
Anchor position
Worker height allowance (m)
Clearance below worker (m)
This calculator provides a general estimate only. Calculations are based on a default energy absorber deployment allowance of 1.2m and a built-in 1m safety margin.
Fall arrest systems must be assessed by a competent person using the specific equipment instructions, site conditions, anchorage position, and rescue requirements. All system lengths, harness attachment position, available clearance, carried equipment, and worker height must be accurately measured and considered. Additional factors including swing fall hazards, system stretch, compatibility of components, and manufacturer instructions may affect the actual clearance required.
