ZERO
Flame
Hot works utility fall arrest harness
SKU: HFSF017XXL
Overview
The Flame is light-weight Non-flammable general-purpose hot works harness for working environments where spark and heat pose a danger, such as grinding, gas cutting and welding.
Made from Kevlar-Nomex webbing, the harness is built to resist flames under EN 358 cl.4.1.5 and suitable for explosion hazard zones.
Weighing as little as 1150 grams, this full-body harness features front and rear fall arrest attachment points; including a dorsal extension with Velcro stowage, and front quick connect buckles on the legs and chest.
Sizes
Rating
Life Span
Certifications
AS/NZS 1891.1:2007 Harnesses and ancillary equipment
Product Detail
| Model | Size | Weight (g) | Dimensions | Material |
|---|---|---|---|---|
| HFSF017XXL |
XXL |
1200g |
90 - 140cm waist |
Polyester webbing 45mm Steel hardware |
- Features
- Downloads
- Fall Clearance Calculator
Fall Clearance Calculator
Lanyard length (m)
Anchor position
Worker height allowance (m)
Clearance below worker (m)
This calculator provides a general estimate only. Calculations are based on a default energy absorber deployment allowance of 1.2m and a built-in 1m safety margin.
Fall arrest systems must be assessed by a competent person using the specific equipment instructions, site conditions, anchorage position, and rescue requirements. All system lengths, harness attachment position, available clearance, carried equipment, and worker height must be accurately measured and considered. Additional factors including swing fall hazards, system stretch, compatibility of components, and manufacturer instructions may affect the actual clearance required.
