ZERO
Rigger
All purpose construction and rescue harness
SKU: HRP1679SML
Overview
The Rigger is a multi-purpose harness for the discerning worker that carries out a multitude of tasks and requires all-day comfort.
Incorporating a padded waist belt with our advanced 3D moisture-wicking mesh fabric for advanced breathability, the Rigger comes with off-set side positioning D’s and shoulder rescue loops, so you are ready to carry out any type of pole, rescue and confined space work.
Sizes
Rating
Life Span
Certifications
EN 358:2018 Personal protective equipment for work positioning and prevention of falls from a height.
EN 1497:2007 Personal fall protection equipment. Rescue harnesses
EN 813:2008, Personal protective equipment for prevention of falls from a height. Sit harnesses
AS/NZS 1891.1:2007 Harnesses and ancillary equipment
Product Detail
| Model | Size | Weight (g) | Dimensions | Material |
|---|---|---|---|---|
| HRP1679SML |
SML |
2640g |
75 - 110cm waist |
Polyester webbing 45mm Steel hardware |
- Features
- Downloads
- Fall Clearance Calculator
Fall Clearance Calculator
Lanyard length (m)
Anchor position
Worker height allowance (m)
Clearance below worker (m)
This calculator provides a general estimate only. Calculations are based on a default energy absorber deployment allowance of 1.2m and a built-in 1m safety margin.
Fall arrest systems must be assessed by a competent person using the specific equipment instructions, site conditions, anchorage position, and rescue requirements. All system lengths, harness attachment position, available clearance, carried equipment, and worker height must be accurately measured and considered. Additional factors including swing fall hazards, system stretch, compatibility of components, and manufacturer instructions may affect the actual clearance required.
