ZERO
Descend Elec
Cable battery powered Winch
SKU: WDE0CM/150
Overview
Battery powered winch equipped with a 5mm diameter, 15m long steel line wound on a drum.
The device is designed for cargo and personnel lifting. Working load limit (WLL) for lifting and lowering cargo and personnel is up to 140kg. If an additional TU415/TU416 pulley is used, the working load limit when lifting goods (WLL) can be increased to 250kg. The device can be used to lift, lower and to evacuate personnel only when an additional WR / CR / CRW series fall arrest device is used.
Battery power supply. The kit includes two 18V 4.0Ah batteries and a charger. The battery operating time at full load is approximately 20...25 minutes. Operating speed: 4m/min (using the TU415/TU416 pulley - 2m/min).
The device is fitted with a connecting plate (RUP506-000-001) as well as a UTB connector (AT017-330).
Sizes
Rating
Life Span
Certifications
Product Detail
| Model | Size | Weight (g) | Dimensions | Material |
|---|---|---|---|---|
| WDE0CM/150 |
15m |
10kg |
29 x 12 x 14cm |
galvanized steel, cast iron |
- Features
- Downloads
- Fall Clearance Calculator
Fall Clearance Calculator
Lanyard length (m)
Anchor position
Worker height allowance (m)
Clearance below worker (m)
This calculator provides a general estimate only. Calculations are based on a default energy absorber deployment allowance of 1.2m and a built-in 1m safety margin.
Fall arrest systems must be assessed by a competent person using the specific equipment instructions, site conditions, anchorage position, and rescue requirements. All system lengths, harness attachment position, available clearance, carried equipment, and worker height must be accurately measured and considered. Additional factors including swing fall hazards, system stretch, compatibility of components, and manufacturer instructions may affect the actual clearance required.
