ZERO
Descend ElecPro
Single Phase 230V Electric Winch
SKU: WDEPCM/300
Overview
The 230V AC 1-phase electric winch is equipped with a wire rope of 6mm diameter and 30m length rolled on a drum, used to lift goods. Admissible working load while lifting goods (WLL): 500kg. If an additional pulley block system is used, the working load when lifting goods (WLL) can be increased to 1000kg.
The device can be used to lift and descend people and to evacuate them when an additional self-holding device of the BLOCKMAX series is used. Admissible WLL: 200kg. A 230V 1-phase alternating power supply. The kit includes a cable for connection to the mains. Operating speed: 7m/min. The device is equipped with a tie plate as well as with a Universal Bracket ZDC000.
Sizes
- 30m
Rating
Life Span
Certifications
Product Detail
| Model | Size | Weight (g) | Dimensions | Material |
|---|---|---|---|---|
| WDEPCM/300 |
30m |
21kg |
49 x 17 x 18cm |
Steel |
- Features
- Downloads
- Fall Clearance Calculator
Fall Clearance Calculator
Lanyard length (m)
Anchor position
Worker height allowance (m)
Clearance below worker (m)
This calculator provides a general estimate only. Calculations are based on a default energy absorber deployment allowance of 1.2m and a built-in 1m safety margin.
Fall arrest systems must be assessed by a competent person using the specific equipment instructions, site conditions, anchorage position, and rescue requirements. All system lengths, harness attachment position, available clearance, carried equipment, and worker height must be accurately measured and considered. Additional factors including swing fall hazards, system stretch, compatibility of components, and manufacturer instructions may affect the actual clearance required.
Diameter of rope 6mm
Type of rope steel
Dimensions: 490 x 170 x 180mm
Permissible work load: 500kg for cargo, 200kg for persons
Need to find out out more about your PPE technical information?
We have a dedicated product technical information and downloads section.
