ZERO
Guard Pro
Work Positioning device with lever mechanism
SKU: WPGPRX5/050
Overview
The ZERO® Guard Pro is constructed with a 12mm rope, rope protector and positioning device that is easy to adjust by pushing on the lever handle.
The Guard Pro can be used as a descender when the connector end is anchored overhead, and the lever device is attached to the centre ventral attachment point on a rope access type harness.
Sizes
Rating
Life Span
Certifications
AS/NZS 1891.1:2007 Harnesses and ancillary equipment
Product Detail
| Model | Size | Weight (g) | Dimensions | Material |
|---|---|---|---|---|
| WPGPRX5/050 |
5m |
1.45kg |
5m |
* |
- Features
- Downloads
- Fall Clearance Calculator
Fall Clearance Calculator
Lanyard length (m)
Anchor position
Worker height allowance (m)
Clearance below worker (m)
This calculator provides a general estimate only. Calculations are based on a default energy absorber deployment allowance of 1.2m and a built-in 1m safety margin.
Fall arrest systems must be assessed by a competent person using the specific equipment instructions, site conditions, anchorage position, and rescue requirements. All system lengths, harness attachment position, available clearance, carried equipment, and worker height must be accurately measured and considered. Additional factors including swing fall hazards, system stretch, compatibility of components, and manufacturer instructions may affect the actual clearance required.
