ZERO
Pinnacle Exo
Multi-impact tested helmet with electrical protection
SKU: ZPE02BLACK
Overview
The Pinnacle Exo is a multi-impact tested helmet with electrical protection, ideal for all types of electrical work carried out at height. The Pinnacle Exo integrates slots for cap attached ear protectors and capacity for direct-fit visors.
The closed shell provides resistance from electric shock and arc flash and the chin strap incorporates Stopfire's permanent flame retardant agent with excellent resistance to abrasion. The Exo is also rated for molten metal splash and lateral deformation.
Sizes
Rating
Life Span
Certifications
EN 12492:2012
PR4.2.1 (Shock absorption), PR4.1.3 (Chinstrap Retention System); PR4.2.3.(Chinstrap Retention System Strength <500N)
EN 397:2012+A1:2012
LD, MM, -40°C to +50°C. Resistance to lateral deformation (LD); Protection against molten metal splashes (MM); Protection against impacts at low temperatures (-40°C); Protection against impacts at high temperatures (+50°C)
EN 50365:2002
PR 6.3.4, PR 6.3.5 Class 0, 1500 Vdc, 1000 Vac
ANSI/ISEA Z89.1-2014
Type 1, Class E
Product Detail
| Model | Size | Weight (g) | Dimensions | Material |
|---|---|---|---|---|
| ZPE02BLACK |
* |
440g |
54 - 62cm |
ABS Advanced Thermo Material Shell exterior, high-density EPS polystyrene |
- Features
- Downloads
- Fall Clearance Calculator
Fall Clearance Calculator
Lanyard length (m)
Anchor position
Worker height allowance (m)
Clearance below worker (m)
This calculator provides a general estimate only. Calculations are based on a default energy absorber deployment allowance of 1.2m and a built-in 1m safety margin.
Fall arrest systems must be assessed by a competent person using the specific equipment instructions, site conditions, anchorage position, and rescue requirements. All system lengths, harness attachment position, available clearance, carried equipment, and worker height must be accurately measured and considered. Additional factors including swing fall hazards, system stretch, compatibility of components, and manufacturer instructions may affect the actual clearance required.
