ZERO
Post I
Anchor post for temporary static line setup
SKU: APP00XM
Overview
The ZERO® Post-I anchor system is designed for protection of works on a height on steel structures based on I-beams and other works on steel structures. The system is simple to install and requires no special tools. The Post-I can be expanded by adding more modules and connects via the Z-Line Temporary Static Line.
Complying with EN 795:2012 for devices type C and document CEN TS16415 the Post L anchor system is designed for fall protection from steel structures based on I-beams.
Sizes
Rating
Life Span
Certifications
Product Detail
| Model | Size | Weight (g) | Dimensions | Material |
|---|---|---|---|---|
| APP00XM |
* |
15kg |
1850 x 713 x 230mm |
Aluminium |
- Features
- Downloads
- Fall Clearance Calculator
Fall Clearance Calculator
Lanyard length (m)
Anchor position
Worker height allowance (m)
Clearance below worker (m)
This calculator provides a general estimate only. Calculations are based on a default energy absorber deployment allowance of 1.2m and a built-in 1m safety margin.
Fall arrest systems must be assessed by a competent person using the specific equipment instructions, site conditions, anchorage position, and rescue requirements. All system lengths, harness attachment position, available clearance, carried equipment, and worker height must be accurately measured and considered. Additional factors including swing fall hazards, system stretch, compatibility of components, and manufacturer instructions may affect the actual clearance required.
