ZERO
Tether
Diversionary anchor plate
SKU: ATD000M
Overview
The Tether by ZERO® is a safe secure diversionary anchor point for metal roofing applications. The Tether is designed as a diversionary anchorage point for total restraint application. The device gives the operator a 360 degree unhindered working area up to the roof edge whilst retaining a restraint position.
The Tether can be used on metal clad roofs fixing directly to the metal surface with a minimum of x3 recommended roof screws and can also be used on trim deck roofs.
Sizes
Rating
Life Span
Certifications
Product Detail
| Model | Size | Weight (g) | Dimensions | Material |
|---|---|---|---|---|
| ATD000M |
* |
1270g |
Length 500mm |
Zinc Steel |
- Features
- Downloads
- Fall Clearance Calculator
Fall Clearance Calculator
Lanyard length (m)
Anchor position
Worker height allowance (m)
Clearance below worker (m)
This calculator provides a general estimate only. Calculations are based on a default energy absorber deployment allowance of 1.2m and a built-in 1m safety margin.
Fall arrest systems must be assessed by a competent person using the specific equipment instructions, site conditions, anchorage position, and rescue requirements. All system lengths, harness attachment position, available clearance, carried equipment, and worker height must be accurately measured and considered. Additional factors including swing fall hazards, system stretch, compatibility of components, and manufacturer instructions may affect the actual clearance required.
