ZERO
MultiBeam
Multi angle I-beam anchor
SKU: AMB00XM
Overview
The ZERO® MultiBeam is a temporary anchorage point for both horizontal and vertical use. Designed to clamp to any beam flange and used in conjunction with a shock absorbing lanyard or a self retracting lifeline, the I MultiBeam can also be used with a positioning lanyard for work restraint.
The flange can be located on the top, bottom (horizontal) or side (vertical) of an I-Beam which has a minimum width of 125mm and maximum width of 300mm.
Sizes
Rating
Life Span
Certifications
Product Detail
| Model | Size | Weight (g) | Dimensions | Material |
|---|---|---|---|---|
| AMB00XM |
* |
4700g |
440 x 100 x 45mm |
Steel & Aluminium Alloy |
- Features
- Downloads
- Fall Clearance Calculator
Fall Clearance Calculator
Lanyard length (m)
Anchor position
Worker height allowance (m)
Clearance below worker (m)
This calculator provides a general estimate only. Calculations are based on a default energy absorber deployment allowance of 1.2m and a built-in 1m safety margin.
Fall arrest systems must be assessed by a competent person using the specific equipment instructions, site conditions, anchorage position, and rescue requirements. All system lengths, harness attachment position, available clearance, carried equipment, and worker height must be accurately measured and considered. Additional factors including swing fall hazards, system stretch, compatibility of components, and manufacturer instructions may affect the actual clearance required.
